If you store your jon boat to bass boat creation outdoors, you need a good cover and bracing to keep water, leaves and other debris out of your boat.. Well, its that time of year here in ny, time to cover the boat up, heck we're expecting snow tonight, crazy.. since i picked up my 1995 3200 scr just this summer, anyone have any cool pics of a diy. This pin was discovered by richard johnson. discover (and save) your own pins on pinterest..
I need to build some type of frame/support to hold up a tarp over my boat during the fall and winter. i have tried different things for the past few years and always wind up with puddles on the tarp.. I put a hinge in the wood support above the rear seat so i can swing up the wood and open the engine compartment cover (sun pad) to charge the batteries over the winter. i have a custom cover for this boat and with this support system in place i don't get any water in the boat over the winter.. While under cover betty raised it up till tight and marked it then i drilled a hole for a bolt. on top i used a 1/2 cap with a 2"cap screwed to it using a recessed screw hole. the only place we had water pool was over tanning pad..
Comments
Post a Comment